;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;
;;	    __  ___          __      __         
;;	   /  |/  /___  ____/ /_  __/ /__  _____
;;	  / /|_/ / __ \/ __  / / / / / _ \/ ___/
;;	 / /  / / /_/ / /_/ / /_/ / /  __(__  ) 
;;	/_/  /_/\____/\__,_/\__,_/_/\___/____/  
;;
;; Created By Aditya Shakya @adi1090x
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/alsa]
type = internal/alsa

; Soundcard to be used
; Usually in the format hw:# where # is the card number
; You can find the different card numbers in `/proc/asound/cards`
;;master-soundcard = default
;;speaker-soundcard = default
;;headphone-soundcard = default

; Name of the master, speaker and headphone mixers
; Use the following command to list available mixer controls:
; $ amixer scontrols | sed -nr "s/.*'([[:alnum:]]+)'.*/\1/p"
; If master, speaker or headphone-soundcard isn't the default, 
; use `amixer -c # scontrols` instead where # is the number 
; of the master, speaker or headphone soundcard respectively
;
; Default: Master
;;master-mixer = Master

; Optionally define speaker and headphone mixers
; Default: none
;;speaker-mixer = Speaker
; Default: none
;;headphone-mixer = Headphone

; NOTE: This is required if headphone_mixer is defined
; Use the following command to list available device controls
; $ amixer controls | sed -r "/CARD/\!d; s/.*=([0-9]+).*name='([^']+)'.*/printf '%3.0f: %s\n' '\1' '\2'/e" | sort
; You may also need to use `amixer -c # controls` as above for the mixer names
; Default: none
;;headphone-id = 9

; Use volume mapping (similar to amixer -M and alsamixer), where the increase in volume is linear to the ear
; Default: false
;;mapped = true

; Interval for volume increase/decrease (in percent points)
; Default: 5
;;interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume> <label-volume>

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
;format-muted = <label-muted>

; Available tokens:
;   %percentage% (default)
label-volume = %percentage%%

; Available tokens:
;   %percentage% (default
format-muted-prefix = 
label-muted = " Muted"
label-muted-foreground = ${color.accent}

; Only applies if <ramp-volume> is used
ramp-volume-0 = 
ramp-volume-1 = 
ramp-volume-2 = 
ramp-volume-3 = 
ramp-volume-4 = 

; If defined, it will replace <ramp-volume> when
; headphones are plugged in to `headphone_control_numid`
; If undefined, <ramp-volume> will be used for both
; Only applies if <ramp-volume> is used
ramp-headphones-0 = 
ramp-headphones-1 = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;[module/backlight]
;type = internal/xbacklight

; Use the following command to list available cards:
; $ ls -1 /sys/class/backlight/
;card = intel_backlight

; Available tags:
;   <label> (default)
;   <ramp>
;   <bar>
;format = <ramp> <label>

; Available tokens:
;   %percentage% (default)
;label = %percentage%%

; Only applies if <ramp> is used

;ramp-0 = 
;ramp-1 = 
;ramp-2 = 
;ramp-3 = 
;ramp-4 = 

; Only applies if <bar> is used
;;bar-width = 10
;;bar-indicator = |
;;bar-fill = ─
;;bar-empty = ─

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;[module/battery]
;type = internal/battery

; This is useful in case the battery never reports 100% charge
;full-at = 99

; Use the following command to list batteries and adapters:
; $ ls -1 /sys/class/power_supply/
;battery = BAT1
;adapter = ACAD

; If an inotify event haven't been reported in this many
; seconds, manually poll for new values.
;
; Needed as a fallback for systems that don't report events
; on sysfs/procfs.
;
; Disable polling by setting the interval to 0.
;
; Default: 5
;poll-interval = 2

; see "man date" for details on how to format the time string
; NOTE: if you want to use syntax tags here you need to use %%{...}
; Default: %H:%M:%S
;time-format = %H:%M

; Available tags:
;   <label-charging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-charging>
;format-charging = <animation-charging> <label-charging>
;;format-charging-prefix = 
; Available tags:
;   <label-discharging> (default)
;   <bar-capacity>
;   <ramp-capacity>
;   <animation-discharging>
;format-discharging = <ramp-capacity> <label-discharging>

; Available tags:
;   <label-full> (default)
;   <bar-capacity>
;   <ramp-capacity>
;format-full = <ramp-capacity> <label-full>

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current charge rate in watts)

;label-charging = %percentage%%

; Available tokens:
;   %percentage% (default)
;   %time%
;   %consumption% (shows current discharge rate in watts)
;label-discharging = %percentage%%

; Available tokens:
;   %percentage% (default)
label-full = Fully Charged

; Only applies if <ramp-capacity> is used
;ramp-capacity-0 = 
;ramp-capacity-1 = 
;ramp-capacity-2 = 
;ramp-capacity-3 = 
;ramp-capacity-4 = 
;ramp-capacity-5 = 
;ramp-capacity-6 = 
;ramp-capacity-7 = 
;ramp-capacity-8 = 
;ramp-capacity-9 = 

; Only applies if <bar-capacity> is used
;bar-capacity-width = 10

; Only applies if <animation-charging> is used
;animation-charging-0 = 
;animation-charging-1 = 
;animation-charging-2 = 
;animation-charging-3 = 
;animation-charging-4 = 
;animation-charging-5 = 
;animation-charging-6 = 
;animation-charging-7 = 
;animation-charging-8 = 

; Framerate in milliseconds
;animation-charging-framerate = 750

; Only applies if <animation-discharging> is used
;;animation-discharging-0 = 
;;animation-discharging-1 = 
;;animation-discharging-2 = 
;;animation-discharging-3 = 
;;animation-discharging-4 = 
;;animation-discharging-5 = 
;;animation-discharging-6 = 
;;animation-discharging-7 = 
;;animation-discharging-8 = 

; Framerate in milliseconds
;animation-discharging-framerate = 500

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/bspwm]
type = internal/bspwm

; Only show workspaces defined on the same output as the bar
; NOTE: The bspwm and XRandR monitor names must match, which they do by default.
; Default: true
;;pin-workspaces = true

; Output mode flags after focused state label
; Default: false
;;inline-mode = false

; Create click handler used to focus workspace
enable-click = true

; Create scroll handlers used to cycle workspaces
enable-scroll = true

; Set the scroll cycle direction 
reverse-scroll = true

; Use fuzzy (partial) matching on labels when assigning 
; icons to workspaces
; Example: code;♚ will apply the icon to all workspaces 
; containing 'code' in the label
; Default: false
;;fuzzy-match = true

;  ws-icon-[0-9]+ = label;icon
; Note that the label needs to correspond with the bspwm workspace name
;;ws-icon-0 = I;  
;;ws-icon-1 = II; 
;;ws-icon-2 = graphics;♜
;;ws-icon-3 = mail;♝
;;ws-icon-4 = web;♞
;;ws-icon-default = 

; Available tags:
;   <label-monitor>
;   <label-state> - gets replaced with <label-(focused|urgent|occupied|empty)>
;   <label-mode> - gets replaced with <label-(monocle|tiled|fullscreen|floating|locked|sticky|private)>
; Default: <label-state>
;;format = <label-state> <label-mode>

; Available tokens:
;   %name%
; Default: %name%
;;label-monitor = %name%

; If any values for label-dimmed-N are defined, the workspace/mode
; colors will get overridden with those values if the monitor is out of focus
; To only override workspaces in a specific state, use:
;   label-dimmed-focused
;   label-dimmed-occupied
;   label-dimmed-urgent
;   label-dimmed-empty
;;label-dimmed-foreground = #555
;;label-dimmed-underline = ${bar/top.background}
;;label-dimmed-focused-background = #f00

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-focused = 
;;label-focused-foreground = #ffffff
label-focused-foreground = ${color.accent}
;;label-focused-background = #3f3f3f
;;label-focused-underline = #fba922

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-occupied = 
;;label-occupied-underline = #555555

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
;;label-urgent = %icon%
;;label-urgent-foreground = #000000
;;label-urgent-background = #bd2c40
;;label-urgent-underline = #9b0a20

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
;;label-empty = %icon%
label-empty = 
;;label-empty-foreground = #55

; The following labels will be used to indicate the layout/mode
; for the focused workspace. Requires <label-mode>
;
; Available tokens:
;   None
;label-monocle = 
;label-tiled = 
;label-fullscreen = 
;label-floating = 
;label-pseudotiled = P
;label-locked = 
;label-locked-foreground = #bd2c40
;label-sticky = 
;label-sticky-foreground = #fba922
;label-private = 
;label-private-foreground = #bd2c40

; Separator in between workspaces
label-separator = " "
label-separator-padding = 0
;;label-separator-foreground = #ffb52a

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/cpu]
type = internal/cpu

; Seconds to sleep between updates
; Default: 1
interval = 0.5

; Available tags:
;   <label> (default)
;   <bar-load>
;   <ramp-load>
;   <ramp-coreload>
;;format = <label> <ramp-coreload>
format = <label>
format-prefix = cpu

; Available tokens:
;   %percentage% (default) - total cpu load averaged over all cores
;   %percentage-sum% - Cumulative load on all cores
;   %percentage-cores% - load percentage for each core
;   %percentage-core[1-9]% - load percentage for specific core
label = " %percentage%%"

; Spacing between individual per-core ramps
;;ramp-coreload-spacing = 1
;;ramp-coreload-0 = 
;;ramp-coreload-1 = 
;;ramp-coreload-2 = 
;;ramp-coreload-3 = 
;;ramp-coreload-4 = 

;;ramp-load-0 = 
;;ramp-load-1 = 
;;ramp-load-2 = 
;;ramp-load-3 = 
;;ramp-load-4 = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/date]
type = internal/date

; Seconds to sleep between updates
interval = 1.0

; See "http://en.cppreference.com/w/cpp/io/manip/put_time" for details on how to format the date string
time =  %H:%M

; if `date-alt` or `time-alt` is defined, clicking
; the module will toggle between formats
time-alt = %d.%m.%Y

; Available tags:
;   <label> (default)
format = <label>

; Available tokens:
;   %date%
;   %time%
label = %time%

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/filesystem]
type = internal/fs

; Mountpoints to display
mount-0 = /
;;mount-1 = /home
;;mount-2 = /var

; Seconds to sleep between updates
; Default: 30
interval = 10

; Display fixed precision values
; Default: false
fixed-values = true

; Spacing between entries
; Default: 2
;;spacing = 4

; Available tags:
;   <label-mounted> (default)
;   <bar-free>
;   <bar-used>
;   <ramp-capacity>
format-mounted = <label-mounted>
format-mounted-prefix = hd

; Available tags:
;   <label-unmounted> (default)
format-unmounted = <label-unmounted>
format-unmounted-prefix = hdu

; Available tokens:
;   %mountpoint%
;   %type%
;   %fsname%
;   %percentage_free%
;   %percentage_used%
;   %total%
;   %free%
;   %used%
; Default: %mountpoint% %percentage_free%%
label-mounted = " %free%"

; Available tokens:
;   %mountpoint%
; Default: %mountpoint% is not mounted
label-unmounted = %mountpoint%: not mounted

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;;[module/github]
;;type = internal/github

; Accessing an access token stored in file
;;token = ${file:/path/to/file/containing/github/access.token}

; Accessing an access token stored in an environment variable
;;token = ${env:GITHUB_ACCESS_TOKEN}

; Whether empty notifications should be displayed or not
;;empty-notifications = false

; Number of seconds in between requests
;;interval = 10

; Available tags:
;   <label> (default)
;;format = <label>

; Available tokens:
;   %notifications% (default)
; Default: Notifications: %notifications%
;;label = %notifications%

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/memory]
type = internal/memory

; Seconds to sleep between updates
; Default: 1
interval = 3

; Available tags:
;   <label> (default)
;   <bar-used>
;   <bar-free>
;   <ramp-used>
;   <ramp-free>
;   <bar-swap-used>
;   <bar-swap-free>
;   <ramp-swap-used>
;   <ramp-swap-free>
format = <label>
format-prefix = 
; Available tokens:
;   %percentage_used% (default)
;   %percentage_free%
;   %gb_used%
;   %gb_free%
;   %gb_total%
;   %mb_used%
;   %mb_free%
;   %mb_total%
;   %percentage_swap_used%
;   %percentage_swap_free%
;   %mb_swap_total%
;   %mb_swap_free%
;   %mb_swap_used%
;   %gb_swap_total%
;   %gb_swap_free%
;   %gb_swap_used%

label = " %mb_used%"

; Only applies if <bar-used> is used
;;bar-used-indicator =
;;bar-used-width = 50
;;bar-used-foreground-0 = #55aa55
;;bar-used-foreground-1 = #557755
;;bar-used-foreground-2 = #f5a70a
;;bar-used-foreground-3 = #ff5555
;;bar-used-fill = ▐
;;bar-used-empty = ▐
;;bar-used-empty-foreground = #444444

; Only applies if <ramp-used> is used
;;ramp-used-0 = 
;;ramp-used-1 = 
;;ramp-used-2 = 
;;ramp-used-3 = 
;;ramp-used-4 = 

; Only applies if <ramp-free> is used
;;ramp-free-0 = 
;;ramp-free-1 = 
;;ramp-free-2 = 
;;ramp-free-3 = 
;;ramp-free-4 = 

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;[module/mpd]
;type = internal/mpd

; Host where mpd is running (either ip or domain name)
; Can also be the full path to a unix socket where mpd is running.
;;host = 127.0.0.1
;;port = 6600
;;password = mysecretpassword

; Seconds to sleep between progressbar/song timer sync
; Default: 1
;interval = 2

; Available tags:
;   <label-song> (default)
;   <label-time>
;   <bar-progress>
;   <toggle> - gets replaced with <icon-(pause|play)>
;   <toggle-stop> - gets replaced with <icon-(stop|play)>
;   <icon-random>
;   <icon-repeat>
;   <icon-repeatone> (deprecated)
;   <icon-single> - Toggle playing only a single song. Replaces <icon-repeatone>
;   <icon-consume>
;   <icon-prev>
;   <icon-stop>
;   <icon-play>
;   <icon-pause>
;   <icon-next>
;   <icon-seekb>
;   <icon-seekf>
;format-online = <label-song>  <icon-prev> <toggle> <icon-next>

;format-playing = ${self.format-online}
;format-paused = ${self.format-online}
;format-stopped = ${self.format-online}

; Available tags:
;   <label-offline>
;format-offline = <label-offline>

; Available tokens:
;   %artist%
;   %album-artist%
;   %album%
;   %date%
;   %title%
; Default: %artist% - %title%
;label-song =  "%artist% - %title%"
;label-song-maxlen = 25
;label-song-ellipsis = true

; Available tokens:
;   %elapsed%
;   %total%
; Default: %elapsed% / %total%
;;abel-time = %elapsed% / %total%

; Available tokens:
;   None
;label-offline = "MPD is offline"

; Only applies if <icon-X> is used
;icon-play = 
;icon-pause = 
;icon-stop = 
;icon-prev = 
;icon-next = 
;icon-seekb = ⏪
;icon-seekf = ⏩
;icon-random = 🔀
;icon-repeat = 🔁
;icon-repeatone = 🔂
;icon-single = 🔂
;icon-consume = ✀

; Used to display the state of random/repeat/repeatone/single
; Only applies if <icon-[random|repeat|repeatone|single]> is used
;;toggle-on-foreground = #ff
;;toggle-off-foreground = #55

; Only applies if <bar-progress> is used
;;bar-progress-width = 45
;;bar-progress-indicator = |
;;bar-progress-fill = ─
;;bar-progress-empty = ─

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

; If you use both a wired and a wireless network, just add 2 module definitions. For example
;[module/wired-network]
;type = internal/network
;interface = eth0

;[module/wireless-network]
;type = internal/network
;interface = wlp3s0

; Normal Module
[module/network]
type = internal/network
interface = wlp4s0

; Seconds to sleep between updates
; Default: 1
interval = 1.0

; Test connectivity every Nth update
; A value of 0 disables the feature
; NOTE: Experimental (needs more testing)
; Default: 0
;ping-interval = 3

; @deprecated: Define min width using token specifiers (%downspeed:min% and %upspeed:min%)
; Minimum output width of upload/download rate
; Default: 3
;;udspeed-minwidth = 5

; Accumulate values from all interfaces
; when querying for up/downspeed rate
; Default: false
accumulate-stats = true

; Consider an `UNKNOWN` interface state as up.
; Some devices have an unknown state, even when they're running
; Default: false
unknown-as-up = true

; Available tags:
;   <label-connected> (default)
;   <ramp-signal>
format-connected = <ramp-signal> <label-connected>

; Available tags:
;   <label-disconnected> (default)
format-disconnected = <label-disconnected>

; Available tags:
;   <label-connected> (default)
;   <label-packetloss>
;   <animation-packetloss>
;;format-packetloss = <animation-packetloss> <label-connected>

; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: %ifname% %local_ip%
label-connected = "%essid% D%downspeed:8% U%upspeed:8%"
;;label-connected-foreground = #eefafafa

; Available tokens:
;   %ifname%    [wireless+wired]
; Default: (none)
label-disconnected = E "Not Connected"
;;label-disconnected-foreground = #66ffffff

; Available tokens:
;   %ifname%    [wireless+wired]
;   %local_ip%  [wireless+wired]
;   %local_ip6% [wireless+wired]
;   %essid%     [wireless]
;   %signal%    [wireless]
;   %upspeed%   [wireless+wired]
;   %downspeed% [wireless+wired]
;   %linkspeed% [wired]
; Default: (none)
;label-packetloss = %essid%
;label-packetloss-foreground = #eefafafa

; Only applies if <ramp-signal> is used
ramp-signal-0 = 0
ramp-signal-1 = 1
ramp-signal-2 = 2
ramp-signal-3 = 3
ramp-signal-4 = 4

; Only applies if <animation-packetloss> is used
;;animation-packetloss-0 = ⚠
;;animation-packetloss-0-foreground = #ffa64c
;;animation-packetloss-1 = ⚠
;;animation-packetloss-1-foreground = #000000
; Framerate in milliseconds
;;animation-packetloss-framerate = 500

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/pulseaudio]
type = internal/pulseaudio

; Sink to be used, if it exists (find using `pacmd list-sinks`, name field)
; If not, uses default sink
sink = alsa_output.pci-0000_12_00.3.analog-stereo

; Use PA_VOLUME_UI_MAX (~153%) if true, or PA_VOLUME_NORM (100%) if false
; Default: true
use-ui-max = true

; Interval for volume increase/decrease (in percent points)
; Default: 5
interval = 5

; Available tags:
;   <label-volume> (default)
;   <ramp-volume>
;   <bar-volume>
format-volume = <ramp-volume> <label-volume>

; Available tags:
;   <label-muted> (default)
;   <ramp-volume>
;   <bar-volume>
;format-muted = <label-muted>

; Available tokens:
;   %percentage% (default)
;label-volume = %percentage%%

; Available tokens:
;   %percentage% (default)
label-muted = Muted
label-muted-foreground = #666

; Only applies if <ramp-volume> is used
ramp-volume-0 = 0
ramp-volume-1 = 1
ramp-volume-2 = 2
ramp-volume-3 = 3
ramp-volume-4 = 4

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

;[module/temperature]
;type = internal/temperature

; Seconds to sleep between updates
; Default: 1
;interval = 0.5

; Thermal zone to use
; To list all the zone types, run 
; $ for i in /sys/class/thermal/thermal_zone*; do echo "$i: $(<$i/type)"; done
; Default: 0
;thermal-zone = 0

; Full path of temperature sysfs path
; Use `sensors` to find preferred temperature source, then run
; $ for i in /sys/class/hwmon/hwmon*/temp*_input; do echo "$(<$(dirname $i)/name): $(cat ${i%_*}_label 2>/dev/null || echo $(basename ${i%_*})) $(readlink -f $i)"; done
; to find path to desired file
; Default reverts to thermal zone setting
;;hwmon-path = /sys/devices/platform/coretemp.0/hwmon/hwmon2/temp1_input

; Threshold temperature to display warning label (in degrees celsius)
; Default: 80
;warn-temperature = 60

; Whether or not to show units next to the temperature tokens (°C, °F)
; Default: true
;units = true

; Available tags:
;   <label> (default)
;   <ramp>
;format = <ramp> <label>

; Available tags:
;   <label-warn> (default)
;   <ramp>
;format-warn = <ramp> <label-warn>

; Available tokens:
;   %temperature% (deprecated)
;   %temperature-c%   (default, temperature in °C)
;   %temperature-f%   (temperature in °F)
;label = %temperature-c%

; Available tokens:
;   %temperature% (deprecated)
;   %temperature-c%   (default, temperature in °C)
;   %temperature-f%   (temperature in °F)
;label-warn = "%temperature-c%"
;label-warn-foreground = #f00

; Requires the <ramp> tag
; The icon selection will range from 0 to `warn-temperature`
; with the current temperature as index.
;ramp-0 = 
;ramp-1 = 
;ramp-2 = 
;ramp-3 = 
;ramp-4 = 
;;ramp-foreground = #55

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/keyboard]
type = internal/xkeyboard

; List of indicators to ignore
blacklist-0 = num lock
blacklist-1 = scroll lock

; Available tags:
;   <label-layout> (default)
;   <label-indicator> (default)
format = kb <label-layout> <label-indicator>
;;format-spacing = 0

; Available tokens:
;   %layout%
;   %name%
;   %number%
; Default: %layout%
label-layout = %layout%
;;label-layout-padding = 2
;;label-layout-background = #bc99ed
;;label-layout-foreground = #000

; Available tokens:
;   %name%
; Default: %name%
label-indicator = %name%
;;label-indicator-padding = 2
label-indicator-foreground = ${color.accent}

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/title]
type = internal/xwindow

; Available tags:
;   <label> (default)
format = <label>
;;format-background = ${color.background}
;;format-foreground = ${color.accent}
;;format-padding = 4

; Available tokens:
;   %title%
; Default: %title%
label = %title%
label-maxlen = 30

; Used instead of label when there is no window title
; Available tokens:
;   None
;;label-empty = Arch Linux
;;label-empty-foreground = #707880

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_

[module/workspaces]
type = internal/xworkspaces

; Only show workspaces defined on the same output as the bar
;
; Useful if you want to show monitor specific workspaces
; on different bars
;
; Default: false
pin-workspaces = true

; Create click handler used to focus desktop
; Default: true
enable-click = true

; Create scroll handlers used to cycle desktops
; Default: true
enable-scroll = true

; icon-[0-9]+ = <desktop-name>;<icon>
; NOTE: The desktop name needs to match the name configured by the WM
; You can get a list of the defined desktops using:
; $ xprop -root _NET_DESKTOP_NAMES
icon-0 = I;
icon-1 = II;
icon-2 = III;
;icon-3 = MED;4
;icon-4 = 5;5
icon-default = 0

; Available tags:
;   <label-monitor>
;   <label-state> - gets replaced with <label-(active|urgent|occupied|empty)>
; Default: <label-state>
format = <label-state>
format-padding = 0

; Available tokens:
;   %name%
; Default: %name%
label-monitor = %name%

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-active = %icon%
label-active-foreground = ${color.accent}
label-active-background = ${color.background}
label-active-overline = ${color.accent}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-occupied = %icon%
label-occupied-underline = ${color.foreground}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-urgent = %icon%
label-urgent-foreground = ${color.red}
label-urgent-background = ${color.background}
;;label-urgent-underline = ${color.red}

; Available tokens:
;   %name%
;   %icon%
;   %index%
; Default: %icon%  %name%
label-empty = %icon%
label-empty-foreground = ${color.foreground}

label-active-padding = 2
label-urgent-padding = 2
label-occupied-padding = 2
label-empty-padding = 2

;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
;;	    __________  ______
;;	   / ____/ __ \/ ____/
;;	  / __/ / / / / /_    
;;	 / /___/ /_/ / __/    
;;	/_____/\____/_/       
;;
;; _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_